Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Active Power Control
- If the PV plant has requirements of power limitation, the power grid scheduling personnel should limit the active power or disable all the active power for the PV plant, that is, to enable the active power derating mode.
- The active power control mode includes the following:
No limit ,DI active scheduling ,Percentage fixed-value limitation (open loop) ,Remote communication scheduling ,Grid connection with limited power (kW) , andRemote output control .
- Log in as Special User, go to the Active power control page, set active power control parameters, and click Submit.Figure 8-3 Active Power Control
