Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring Operations
This topic describes how to operate on the monitoring panel, such as querying site and device information and setting system parameters and user parameters.
- Querying Power Station Information
This topic describes how to view the power station information on the monitoring panel of the SmartLogger, such as the daily, monthly, yearly, historical, and total energy yield. - Querying Inverter Information
This topic describes how to query the running information and version of each inverter connected to the SmartLogger. - Manually Powering On or Off the Inverter on the monitoring panel
This topic describes how to power on or off the inverter on the monitoring panel. - Sending a Reset Command to the Inverter
You can send a reset command to the inverter on the LCD. - Querying Information about the EMI
This topic describes how to query the EMI information on the monitoring panel. - Querying Master SmartLogger Information
This topic describes how to query Master SmartLogger information. - Querying Slave SmartLogger Information
This topic describes how to query Slave SmartLogger information on the monitoring panel. - Querying Information About the Modbus Power Meter
You can query information about the Modbus power meter over the LCD. - Querying Information About the DL/T645 Power Meter
You can query information about the DL/T645 power meter information on the LCD. - Setting DL/T645 Power Meter Parameters
You can set DL/T645 power meter parameters on the LCD. - Querying PLC (MBUS) Information
This section describes how to query the running information and version of a PLC (MBUS) connected to the SmartLogger. - Setting PLC (MBUS) Running Parameters
You can set the PLC (MBUS) running parameters on the monitoring panel. - Sending a Reset Command to the PLC (MBUS)
You can send a reset command to the PLC (MBUS) on the monitoring panel. - Querying PID Information
This topic describes how to query the running information and version of a PID connected to the SmartLogger. - Setting the PID Module Running Parameters
You can set the PID module running parameters on the LCD. - Manually Powering On or Off the PID on the monitoring panel
This topic describes how to power on or off the PID on the monitoring panel. - Clearing Historical PID Information
You can clear the active alarms and historical alarms stored on the PID module over the LCD. - Querying Custom Device Information
This topic describes how to query the running information and version of a custom device connected to the SmartLogger. - Querying Alarm Records
This topic describes how to query active and historical alarms for the SmartLogger and the connected inverters and how to set the alarm record sort mode on the monitoring panel. - Setting the System Language
This topic describes how to set the display language for the SmartLogger on the monitoring panel. - Setting System Time Parameters
This topic describes how to set the date, time and date format for the SmartLogger on the monitoring panel. - Setting SmartLogger Contrast
You can set the SmartLogger contrast on the monitoring panel. - Setting the Currency and Currency Factor
This topic describes how to set the currency and currency factor for the SmartLogger. - Setting the CO2 Emission Reduction Coefficient
- Changing a Password
This topic describes how to change a password on the monitoring panel. - Setting Communications Parameters
You can set the SmartLogger parameters for communication on the monitoring panel. - Restoring Factory Settings
This topic describes how to restore factory settings for the SmartLogger on the monitoring panel. After this operation, all parameters, excluding the current date and time, will restore to the default factory settings. However, the running information, alarm records, and system logs do not change. - Downloading Device Data Using a USB Flash Drive
You can download device logs using a USB flash drive over the monitoring panel, so that you can use the logs for issue review and troubleshooting. - Upgrading Firmware by Using a USB Flash Drive
You can upgrade the firmware on the monitoring panel by using a USB flash drive. You can upgrade the firmware of the SmartLogger and devices connected to the SmartLogger. - Batch Upgrade
This topic describes how to perform a batch upgrade for the SUN2000 on the monitoring panel. - Exporting All Files
You can export all files from the SmartLogger on the monitoring panel. - Importing All Files
You can import all files to the SmartLogger on the monitoring panel. - Offline Configuration
You can import offline configuration files to the SmartLogger through the monitoring panel. - Managing Devices
You can search, add, delete, and assign addresses to devices that are connected to the SmartLogger on the monitoring panel. - Clearing Data
This topic describes how to delete alarm and performance data on the monitoring panel. - Resetting the System
You can reset the system on the LCD. - Querying Product Information
This topic describes how to query the information about the SmartLogger on the monitoring panel.