Restoring Factory Settings
This topic describes how to restore factory settings for the SmartLogger on the monitoring panel. After this operation, all parameters, excluding the current date and time, will restore to the default factory settings. However, the running information, alarm records, and system logs do not change.
Context
- After restoring factory defaults for the SmartLogger, set the user parameters and communications parameters in time and log in to the WebUI to set the environmental monitoring instrument parameters and power grid dispatching parameters.
- The displayed language is English by default.
Procedure
- The following table describes the procedure for restoring factory settings. The parameter values in the following figures are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Choose
and press
.
3. Because of permission restriction, log in as Advanced User or Special User.NOTE:After passing the permission validation, the system keeps the authentication information for 30 seconds. If you exit the screen and log in again within the 30 seconds, no permission authentication is required.
Here use the pages displayed when you log in to the SmartLogger as Advanced User.
4. Choose , and press
.
5. On the displayed page, press
.
6. Press
to complete the settings.
