Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Reactive Power Adjustment
- According to standard requirements, the SmartLogger can reliably adjust power for the connected inverters in real time to ensure that the PV plant can respond to requirements of the power grid company in a timely manner.
- The reactive power control mode includes the following:
No output ,DI reactive scheduling ,Reactive power fix control ,Power factor fix control ,Q-U characteristic curve ,cosφ-P/Pn characteristic curve ,Q-U hysteresis curve(CEI0-16) ,Remote communication scheduling ,Power factor closed-loop control (old policy) ,Power factor closed-loop control ,PF-U characteristic curve , andDry contact remote control(Q/S) .
- Log in as Special User, go to the Reactive power control page, set reactive power control parameters, and click Submit.Figure 8-7 Reactive power control
- No Output
- Dry Contact Remote Control
- Reactive Power Fix Control
- Power Factor Fix Control
- Q-U Characteristic Curve
- cosφ-P/Pn Characteristic Curve
- Q-U Hysteresis Curve (CEI0-16)
- Remote Communication Scheduling
- Power Factor Closed-Loop Control
- Distributed Power Factor Closed-loop Control
- PF-U Characteristic Curve