Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Inverter Information
This topic describes how to query the running information and version of each inverter connected to the SmartLogger.
Procedure
- The following table describes the procedure for viewing
inverter information. The parameter values in the following figures
are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Select
and press
.
3. Select an inverter and press.
NOTE:SUN2000 (1--2) on the left indicates that the inverter connects to Port 1 of the SmartLogger and the communications address of the RS485 port is 2.
The device status is displayed behind the device name.
The follow-up operations are described as follows:- To view the operating data of the inverter, perform step 4.
- To view the version of the inverter, perform step 5.
4. Select and press
Press.
and
to select the target parameter, and then press
.
5. Select and press
.
