Appearance
This topic describes the SmartLogger in terms of its appearance and specifications.
Front View of the Shell
The LCD on the SmartLogger monitoring panel displays information about the power site, devices, alarms, and products. This topic describes how to set parameters and maintain devices over the monitoring panel.
Side View of the shell
| 1. SD card slot (reserved) | 2. USB port |
Rear View of the Shell
| 1. Mounting hole | 2. Rail snap | 3. Heat dissipation hole |
Bottom of the Shell
Port (Silk Screen) |
Function |
Description |
|---|---|---|
POWER |
Power supply |
12 V DC |
FE |
Fast Ethernet |
Connects to a local area network (LAN) switch, router, power over Ethernet (POE) or PC. |
RS232 |
RS232 |
Connects to an external RS232 device. |
AI |
Analog input |
4–20 mA and 0–20 mA current input (active), reserved. |
DI |
Digital input |
Connects to a dry contact input. |
DO |
Digital output |
Relay output |
S0.In |
Connects to a pulse output power meter |
Reserved |
CAN port |
CAN port |
Reserved |
COM1-COM3 |
RS485 |
Supports three RS485 ports that can connect to devices such as the inverter and environmental monitoring instrument (EMI). |