Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to WebUI
- The web software version corresponding to the WebUI snapshots in this document is SmartLogger V100R001C00SPC118. The data on the WebUI snapshots is for reference only.
- Parameters displayed on operation pages vary depending on the role that you use to log in to the WebUI. This document describes the operation pages displayed after you log in as Advanced User.
- Configurable parameters vary depending on the device model and grid code. The actual display prevails. The parameter list provided in this document includes all configurable parameters.
- The 600 V and 1000 V inverters refer to the inverters with the maximum input voltage of 600 V and 1000 V respectively. The 1100 V inverters refer to the inverters with the maximum input voltage of 1100 V and the SUN2000-33KTL-US/36KTL-US/40KTL-US. The maximum input voltage can be queried from the product nameplate or the appropriate user manual.
- Delivering a reset, shutdown, or upgrade command to the solar inverters may cause power grid connection failure, which affects the energy yield.
- Only professionals are allowed to set the grid parameters, protection parameters, feature parameters, and power adjustment parameters of the solar inverters. If the grid parameters, protection parameters and feature parameters are incorrectly set, the solar inverters may not connect to the power grid. If the power adjustment parameters are incorrectly set, the solar inverters may not connect to the power grid as required. In these cases, the energy yield will be affected.
- Only professionals are allowed to set the power grid scheduling parameters of the SmartLogger. Incorrect settings may cause the PV plant to fail to connect to the power grid as required, which affects the energy yield.