Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Custom Device
Custom Device: The SmartLogger can connect to the third-party devices supporting the Modbus-RTU protocol, such as the box-type transformer and environmental monitoring instrument (EMI). Since the protocol information points vary depending on vendors, you need to obtain a protocol information file in .cfg format from Huawei and import the file into the SmartLogger for successfully connecting to a third-party device.
The SmartLogger supports the connection to a maximum of 10 types of custom devices and can connect to multiple devices of the same type.
Querying Related Information
Select a device on the Monitoring page and query related information on the displayed page.
Figure 7-31 Querying device information
![]()
Click the ![]()
, ![]()
, or ![]()
tab on
the tertiary navigation menu to query device information.
, 
, or 
tab on
the tertiary navigation menu to query device information.Setting Telecontrol Parameters
Select a device on the Monitoring page, and select Telecontrol to go to the page.
Figure 7-32 Setting Telecontrol Parameters
![]()
