Querying Slave SmartLogger Information
This topic describes how to query Slave SmartLogger information on the monitoring panel.
Context
The Slave SmartLogger mainly applies to power grid scheduling of large-sized power stations. One SmartLogger can connect to a maximum of 80 devices. When there are more than 80 inverters in the power station, a certain number of Slave SmartLoggers should be configured. The power grid scheduling command sent to the Master SmartLogger is synchronized to the Slave SmartLogger to enable the centralized power grid scheduling of the power station.
Procedure
- To query Slave SmartLogger information, perform the steps
described in the following table. The parameter values in the figures
are for reference only.
LCD
Procedure
1. On the default screen, press
to enter the main menu.
2. Select
and press
.
3. Choose Logger to view the status and IP address of the Slave SmartLogger.
The device status is displayed behind the device name.
