Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparations and WebUI Login
Operating Environment
- The operating system of Windows 7 or later is supported.
- Browser: Chrome 52, Firefox 58, or Internet Explorer 11, or a later version is recommended.
Setting the IP Address
Correctly set the IP address, subnet mask, and gateway for the SmartLogger, PC, and network devices (when connected).
Setting the LAN
- If the SmartLogger is connected to a local area network (LAN) and a proxy server has been set, you need to cancel the proxy server settings.
- If the SmartLogger is connected to the Internet and the PC is connected to the LAN, do not cancel the proxy server settings.
- Open Internet Explorer.
- Choose .
- Click the tab and then click LAN settings.
- Deselect User a proxy server for your LAN.Figure 7-2 LAN setting
- Click OK.
Logging In to the WebUI
The SmartLogger has been connected to a PC directly or over the Ethernet.
- In the address box of a browser, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the IP address of the SmartLogger) and press Enter. The login page is displayed.If you log in to the WebUI for the first time, a security risk warning is displayed. Click Continue to this website to log in to the WebUI.
- It is recommended that users use their own certificates. If the certificate is not replaced, the security risk warning will be displayed during each login.
- After logging in to the WebUI, you can import a certificate under .
- The imported security certificate needs to be bound to the SmartLogger IP address. Otherwise, the security risk warning will still be displayed during login.
Figure 7-3 Security risk warning - Specify Language, User Name, and Password, and click Log In.Figure 7-4 Login page
Parameter
Description
Language Set this parameter as required.
User Name If device commissioning is required, select Advanced User or Special User.
Password - The initial password is Changeme.
- Use the initial password upon first power-on and change it immediately after login. Then, use the new password to log in again. To ensure account security, change the password periodically and keep the new password in mind. A password left unchanged for a long period of time may be stolen or cracked. If a password is lost, the device needs to be restored to its factory settings. In these cases, the user is liable for any loss caused to the PV plant.
- If you enter incorrect passwords for five consecutive times in 5 minutes, your account will be locked out. You have to try again 10 minutes later.
If any page is blank or a menu cannot be accessed after you log in to the WebUI, clear the cache, refresh the page, or log in again.
