Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying Information About the DL/T645 Power Meter
You can query information about the DL/T645 power meter information on the LCD.
Procedure
- The following table describes the procedure for querying
information about the DL/T645 power meter. The parameter values in
the following figures are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Select
and press
.
3. Choose Power Meter and press.
NOTE:Power Meter (3-1) on the left indicates that the power meter connects to port 3 of the SmartLogger and its RS485 communications address is 1.
The device status is displayed behind the device name.
4. Choose and press
.
- To view the running information of the power meter, perform step 5 only.
- To view the communications address of the power meter, perform step 6 only.
5. Choose and press
.
6. Choose and press
.
