Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Process
This topic describes the SmartLogger installation process.
The SmartLogger installation process is shown in Figure 3-1.
Table 3-1 describes the installation process.
Table 3-1 Description of the installation process
Step |
Operation |
Description |
|---|---|---|
1 |
Before unpacking, check that the outer packing materials are intact. After unpacking, check that deliverables are complete and intact. |
|
2 |
Prepare tools required for installation and electrical connections. |
|
3 |
Before installing the SmartLogger, determine an appropriate position to ensure that the SmartLogger works properly. |
|
4 |
The SmartLogger can be installed on a desk, a wall or along a guide rail. |