Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Upgrading Firmware
You can upgrade the firmware of the SmartLogger, inverter, SmartMBUS, or PID module over the WebUI.
Because of permission restriction, log in as Advanced User or Special User. Choose to access the target page.
- Upload the upgrade file of the device to be upgraded. The upgrade file automatically matches the device name and selects all devices of this type.
- (Optional) If you do not need to upgrade a device, clear the device.
For the patch version earlier than the SUN2000 V100R001C11SPC409, SUN2000 V100R001C81SPC101, or SUN2000 V200R001C00, only one inverter can be upgraded. After the upgrade file is uploaded, select only one inverter for upgrade and clear other inverters.
- Click Upgrade.
Figure 7-64 Upgrading firmware
![]()
![]()
The Stop Upgrade function is only effective for the devices waiting to be upgraded.