Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Site Test
After a inverter is put into use, it should be inspected periodically to detect any potential risks and problems. The SmartLogger can inspect inverters over the WebUI.
Because of permission restriction, log in as Advanced User or Special User. Choose to access the target page.
Figure 7-69 Site test
![]()
- The spot-check function is available only for the inverter for which Grid Code is set to Japan standard.
- You can click the Select icon in the upper left corner of the page to select an inspection mode.