Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying PID Information
This topic describes how to query the running information and version of a PID connected to the SmartLogger.
Procedure
- The following table describes the procedure for viewing
the information about a PID. The parameter values in the figures are
for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Select
and press
.
3. Select a PID and pressNOTE:PID (3-1) in the left figure indicates that the PID is connected to the Port 3 of the SmartLogger, and its RS485 communications address is 1.
The subsequent operations are as follows:- To view the operating data of the PID, perform step 4 only.
- To view the version information of the PID, perform step 5 only.
4. Select and press
Press.
and
to select Runing Infomation or Comm. Address, and then press
.
5. Select and press
.
