Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting the CO2 Emission Reduction Coefficient
Procedure
- The following table describes the procedure for setting the CO2 emission reduction coefficient. The data on the following figures are for reference only.
LCD Display
Procedure
1. On the default screen, press
to enter the main menu.
2. Choose
and press
.
3.Because of permission restriction, log in as Common User, or Advanced User.NOTE:After passing the permission validation, the system keeps the authentication information for 30 seconds. If you exit from the Settings page and log in again within 30 seconds, no authentication is required.
Here use the pages displayed when you log in to the SmartLogger as Advanced User.
4. Choose , and press
.
5. Select and press
.
