Remote Communication Scheduling

Active power control mode

Set this parameter to Remote communication scheduling.

The SmartLogger receives the scheduling commands from the upper NMS, resolves the commands for the inverters, and then sends the commands to all connected inverters.

Based on the Remote communication scheduling priority principle, the SmartLogger automatically changes Active power control mode to Remote communication scheduling after receiving a scheduling command from the upper NMS.

Schedule strategy

Supports Disable, Strategy 1, and Strategy 2.

• Disable: The SmartLogger controls the inverter to work at full load and will not receive scheduling commands from the NMS.
• Strategy 1: Open-loop scheduling policy. That is, the SmartLogger evenly allocates the power value from the scheduling device and delivers the average values to each inverter, which then operates with the specific power. The adjustment value delivered by the SmartLogger is constant. After you set Adjustment coefficient, the power value is multiplied by the configured coefficient and then delivered to the inverter.
• Strategy 2: This function is customized for a single site. Set Overshoot, Adjustment period, and Adjustment deadband based on the site scheduling requirements.