Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Offline Configuration
You can import offline configuration files to the SmartLogger through the monitoring panel.
Procedure
- The following table lists the procedure for offline configuration.
The parameter values in the following figures are for reference only.
LCD
Operation Procedure
1. On the default screen, press
to enter the main menu.
2. Choose
and press
.
3. Because of permission restriction, log in as Advanced User or Special User.NOTE:After passing the permission validation, the system keeps the authentication information for 30 seconds. If you exit the screen and log in again within the 30 seconds, no permission authentication is required.
Here use the pages displayed when you log in to the SmartLogger as Advanced User.
4. Choose and press
.
NOTE:- Before this operation, connect the USB flash drive to the USB port.
- The system takes 5 to 10 seconds to detect the USB flash drive. Then perform the following steps.
5. Choose and press
.
6. After the configuration file is imported, choose Latest Status to view the import status of the last offline configuration file and choose Enable offline config to import other offline configuration files.
and press 
