Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Frequently Used Methods for Troubleshooting
This topic describes how to locate faults on the web page, on the U2000, and on the OLT CLI.
Table 1-1 shows the methods for locating faults on the web page, on the U2000, and on the OLT CLI.
Table 1-1 Fault location methods
Fault Location Method |
Fault Location Method (Detail) |
|---|---|
Remote Web |
|
U2000 |
Querying the Physical State of a POTS Port Querying the Status of a VoIP User |
Previous
