No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RTN510 V100 Service Configuration and Maintenance Guide 03

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
About This Document

About This Document

Related Versions

The following table lists the product versions related to this document.

RTN510 Version iManager U2000 Version eSight Version
V100R002C10 V200R018C60 V300R010C00
V100R002C00 V200R018C50 V300R009C00
V100R001C10 V200R017C60 V300R008C00

Intended Audience

This document provides the guidelines to maintaining the RTN510. It also describes the alarms and performance events that are required for troubleshooting during the maintenance.

This document is intended for:

  • Network planning engineer
  • Data configuration engineer
  • System maintenance engineer

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to personal injury.

Calls attention to important information, best practices and tips.

NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration.

General Conventions

The general conventions that may be found in this document are defined as follows.

Convention

Description

Times New Roman

Normal paragraphs are in Times New Roman.

Boldface

Names of files, directories, folders, and users are in boldface. For example, log in as user root.

Italic

Book titles are in italics.

Courier New

Examples of information displayed on the screen are in Courier New.

Command Conventions

The command conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

The keywords of a command line are in boldface.

Italic

Command arguments are in italics.

[ ]

Items (keywords or arguments) in brackets [ ] are optional.

{ x | y | ... }

Optional items are grouped in braces and separated by vertical bars. One item is selected.

[ x | y | ... ]

Optional items are grouped in brackets and separated by vertical bars. One item is selected or no item is selected.

{ x | y | ... }*

Optional items are grouped in braces and separated by vertical bars. A minimum of one item or a maximum of all items can be selected.

[ x | y | ... ]*

Optional items are grouped in brackets and separated by vertical bars. Several items or no item can be selected.

GUI Conventions

The GUI conventions that may be found in this document are defined as follows.

Convention

Description

Boldface

Buttons, menus, parameters, tabs, window, and dialog titles are in boldface. For example, click OK.

>

Multi-level menus are in boldface and separated by the ">" signs. For example, choose File > Create > Folder.

Change History

Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues.

Issue 03 (2019-01-31)

Compared with V100R002C00, V100R002C10 has the following changes:

Update

Description

-

Fixed known defects.

GNE_CONNECT_FULL Added the GNE_CONNECT_FULL alarm.
Configuration Example Added the procedure of configuring port shaping on the NMS.
Alarm Suppression Relationship Added the OUT_PWR_LOW and OUT_PWR_HIGH alarms that can be suppressed by the LASER_SHUT alarm.
MPDU_RETRY_RATE_HIGH Added the MPDU_RETRY_RATE_HIGH alarm.
OFDM_PHY_ERR_HIGH Added the OFDM_PHY_ERR_HIGH alarm.
MPDU_RETRY_RATE_MAX, MPDU_RETRY_RATE_MIN, MPDU_RETRY_RATE_CUR, MPDU_RETRY_RATE_AVG Added the MPDU_RETRY_RATE_MAX, MPDU_RETRY_RATE_MIN, MPDU_RETRY_RATE_CUR, MPDU_RETRY_RATE_AVG performance event.
OFDM_PHY_ERR_COUNT Added the OFDM_PHY_ERR_COUNT performance event.
Creating a Performance Monitoring Task Added Creating a Performance Monitoring Task.
Browsing Current Performance Events Added Browsing Current Performance Events.
Browsing Historical Performance Events Added Browsing Historical Performance Events.

Issue 02 (2018-07-30)

Compared with V100R001C10, V100R002C00 has the following changes:

Update

Description

-

Fixed known defects.

DB_UNSAVE Added the DB_UNSAVE alarm.
GPS_LOS Added the GPS_LOS alarm.
RADIO_RSL_LOW Added parameters to the RADIO_RSL_LOW alarm, causes for generating this alarm, and the procedure of handling this alarm.
STORAGE_FAIL Added parameters to the STORAGE_FAIL alarm.
Service Maintenance on the Network Management Center Added the service maintenance operations for the network management center.

Issue 01 (2018-03-16)

This issue is the first release for the product version V100R001C10.

Translation
Download
Updated: 2019-03-06

Document ID: EDOC1100010048

Views: 15329

Downloads: 200

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next