About This Document
Intended Audience
This document is intended for:
- Network planning engineer
- Hardware installation engineer
- Installation and commissioning engineer
- Field maintenance engineer
- Data configuration engineer
- System maintenance engineer
Familiarity with the basic knowledge related to digital microwave communication technology will help you apply the information in this document.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol |
Description |
---|---|
Indicates a hazard with a high level of risk which, if not avoided, will result in death or serious injury. |
|
Indicates a hazard with a medium level of risk which, if not avoided, could result in death or serious injury. |
|
Indicates a hazard with a low level of risk which, if not avoided, could result in minor or moderate injury. |
|
Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance deterioration, or unanticipated results. NOTICE is used to address practices not related to personal injury. |
|
Supplements the important information in the main text. NOTE is used to address information not related to personal injury, equipment damage, and environment deterioration. |
Change History
Changes between document issues are cumulative. Therefore, the latest document issue contains all the changes made in earlier issues.
Product Version V100 - Issue 08 (2020-12-31)
Topic |
Description |
---|---|
Entire document |
Fixed known bugs. |
Product Version V100 - Issue 07 (2020-09-20)
Topic |
Description |
---|---|
Updated the eSight GUI. |
Product Version V100 - Issue 06 (2020-06-30)
Topic |
Description |
---|---|
The RT II VER.C version is supported. |
|
The RT II supports VLAN-free DCN. |
Product Version V100 - Issue 05 (2020-04-20)
Topic |
Description |
---|---|
Instrument-free tests are supported, and the AP centrally manages RT IIs. |
|
The RT II supports E-Line services, MAC address blacklist, and static MAC addresses. |
|
The AP and RT support the ATPC feature. |
Product Version V100 - Issue 04 (2019-07-30)
Topic |
Description |
---|---|
The RT II supports two GE ports. |
|
Instrument-free tests are supported, and the AP centrally manages RTs. |
Product Version V100 - Issue 03 (2019-01-31)
Topic |
Description |
---|---|
Added the throughput testing method. |
Product Version V100 - Issue 02 (2018-07-30)
Topic |
Description |
---|---|
Supported the 10 MHz channel bandwidth. |
|
Added the PtP networking scenario. |
|
|
|
New |
|
|
|
Added the dying gasp function. |
|
The AP supports the flat antenna, which is used in the PtP scenario. |
Product Version V100 - Issue 01 (2018-03-16)
This is the first release for V100R001C10.