No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

RTN510 V100 TDMA User Manual 04

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration

Configuration

After the AP is powered on, DFS must be configured on it.

Prerequisites

The NE has loaded.

The basic configuration for the microwave link has completed.

Tools

NMS based on web

Procedure

  1. Configure the downlink/uplink timeslot ratio.

    V100R00C10, V100R002C00, and V100R002C10:



    NOTE:

    Flexible is the default value, which means the downlink/uplink timeslot is flexible. The GPS simultaneous transmission and reception is disabled.

    If Other value is configured, the GPS simultaneous transmission and reception is enabled automatically.

    V100R019C00 or later:



Translation
Download
Updated: 2019-09-09

Document ID: EDOC1100010050

Views: 2457

Downloads: 196

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next