No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 Cloud Classroom Solution Product Documentation 10 (Single-Classroom Scenarios)

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Mounting a Floppy Drive (KVM)

Mounting a Floppy Drive (KVM)

Scenarios

On FusionCompute, mount a VFD file to a VM for VM OS or service software installation.
  • You can mount a floppy drive to a VM only when the VM is in the Running or Stopped status.
  • Each VM can have only one floppy drive mounted.
NOTE:
You can mount a floppy drive to a VM using the following two methods:
  • Automatically Match: FusionCompute automatically mounts the target VIRTIO driver to the VM based on the VM OS type (only Windows OSs are supported).
  • Manually Assign: Some common VIRTIO drivers exist on FusionCompute. Users can mount required VIRTIO drivers to VMs. This mode applies only to the Windows OS and some non-Linux OSs.

Prerequisites

  • You have logged in to FusionCompute.
  • The VM is in the Stopped or Running status.

Procedure

Select the floppy drive mounting method.

  1. In the navigation tree on the left, click to enter the Resource Pools page.
  2. On the VM tab, enter the search criteria and search for the VM to which the FDD is to be mounted.

    Click name of the target VM.

  3. Click the Configuration tab and choose Hardware > Floppy Drive.
  1. Select the mounting method.

    • If Automatically Match is selected, go to Step 5.
    • If Manually Assign is selected, go to Step 7.

Mount a floppy drive to a VM (Automatically Match).

  1. Set Attach Mode to Automatically Match

    FusionCompute automatically matches the required floppy drive based on the VM OS type. Fusion Compute automatically matches the required floppy drive based on the VM OS type. For details about the supported OSs, see the FusionSphere SIA Huawei Guest OS Compatibility Guide (KVM Enterprise Virtualization).

    NOTE:
    To obtain the FusionSphere SIA Huawei Guest OS Compatibility Guide (KVM Enterprise Virtualization), visit the following websites:

    If the selected OS is not included in the automatically matched OS list, FusionCompute will prompt that the specified VFD file does not exist.

  2. Click Connect.

    The floppy drive is mounted to the VM.

Mount a floppy drive to a VM (Manually Assign).

  1. Select the floppy drive file to be mounted on the page shown in Figure 5-3.

    Figure 5-3 Manually Assign

  2. Click Connect.

    The floppy drive is mounted to the VM.

Translation
Download
Updated: 2019-04-25

Document ID: EDOC1100010651

Views: 26118

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next