No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionAccess V100R006C20 Cloud Classroom Solution Product Documentation 10 (Single-Classroom Scenarios)

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Updating the VM

Updating the VM

Scenario

This section describes how to update the student's VM using a template. Related operations include adding software to, modifying software in, and deleting software from the student's VM.

Prerequisites

  • You have obtained the URL, username, and password for logging in to FusionCompute.
  • You have obtained the software package to be installed.
  • You have obtained image tool FusionAccess_Windows_Installer_V100R006C20SPC102.iso.

Procedure

Converting the template into a VM

  1. In the navigation tree on the left, click to enter the Resource Pools page.
  2. Choose Resource Pools > VM Template, enter the search criteria and search the template is to be converted into a VM.
  3. Locate the row that contains the template is to be converted into a VM and choose More > Convert to VM.

    A dialog box is displayed.

  4. Click Confirm.
  5. Choose Recent Tasks in the lower left corner and click the VM that is successfully converted from a template.
  6. Click Start in the upper part of the page.

    A dialog box is displayed.

  7. Click Confirm. The VM starts.

Using the template tool to configure the VM OS

  1. Mount FusionAccess_Windows_Installer_V100R006C20SPC102.iso to the VM.
  2. In the CD/DVD-ROM directory of the VM, double-click run.bat.

    The FusionAccess Windows Installer window is displayed.

  1. Update the VM template as prompted.

Installing software

  1. Locate the row that contains the VM, and click Log In Using VNC.
  2. Check whether the software package is an ISO file.

  3. Mount the ISO file to the VM.
  4. On the VM, double-click the CD/DVD-ROM.

    On the CD/DVD-ROM drive window that is displayed, you can see the software package. Go to Step 20.

  1. On the VM desktop displayed in the VNC login window, set the IP address of the PC or laptop to an IP address that is in the same segment as the IP address of the management plane.
  2. Choose Start > Run.
  3. In Open, enter \\IP address of the PC or laptop\Drive letter of the drive that contains the software package$ and click OK.

    The Windows Security dialog box is displayed.

  1. Enter the username and password for logging in to the PC or laptop and click OK.

    Go to the task manager of the PC or laptop.

  1. Copy the software installation programs to the C:\ directory on the VM.
  2. Double-click each software installation program and install software as prompted.

    NOTE:

    Copy the software package from the mounted CD/DVD-ROM drive. After the software is installed, you must unmount the CD/DVD-ROM drive from the VM.

Converting the VM into a template

  1. In the navigation tree on the left, click to enter the Resource Pools page.
  2. On the VM tab, enter the search criteria and search the VM to be converted into a template.
  3. Locate the row that contains the VM to be converted into a template and choose More > Power> Stop in the Operation column.
  4. When the VM is in the Stopped status, choose More > Template> Convert to Template.

    A dialog box is displayed.

  5. Click OK.

Configuring the template

  1. On FusionAccess, click Desktop. In the navigation pane on the left, choose Service Configuration > VM Template.
  2. In the right pane, set the template type of the VM to be provisioned and click OK.

Using the template to update VM group

  1. On the FusionAccess portal, choose Desktop > VM Group.

    The page for managing VM groups is displayed.

  2. Enter the search criteria about the VM group to be updated and click Query.
  3. In the query list, select the to-be-updated VM group and click Recompose System Disk.
  1. In the Set Update Policy window that is displayed, set the update policy and notification message as prompted.

    • If the VMs in the VM group are in use or have important data to save later, select Next startup (Not now).
    • If the VMs in the VM group are not in use or no import data needs to be saved, select Immediately (Forced update).

  1. Click OK.
  2. In the Update VM group software window that is displayed, choose the updated VM template, and click Finish.
Translation
Download
Updated: 2019-04-25

Document ID: EDOC1100010651

Views: 26054

Downloads: 162

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next