No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Local HA System Software Installation Guide (SUSE Linux + MySQL + OMMHA) 11

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an Affinity Group

Creating an Affinity Group

The VMs where eSight is deployed must belong to the same anti-affinity VM group. Before creating a VM, you need to create an affinity group on the ServiceCenter.

Prerequisites

  • You have obtained the name and password of user whose role is the VDC administrator.
  • You have configured the haproxyIP mapping in the local PC.

    For details, see the content about how to configure the haproxyIP mapping in the ManageOne ServiceCenter product documentation.

    To obtain the document, perform the following operations:

    1. Log in to http://support.huawei.com.
    2. Enter the keywords ManageOne ServiceCenter XXX and click Search.

      In the keywords, XXX indicates the corresponding version of ManageOne ServiceCenter.

    3. Download the ManageOne ServiceCenter product documentation.

Procedure

  1. Log in to the ServiceCenter as a user whose role is the VDC administrator.

    1. Enter http://IP address of the ServiceCenter in a single-node system or floating IP address of ServiceCenter in a two-node cluster, and press Enter.
    2. Enter the user name and password, and click Login.

  2. Choose Console > Computing > Affinity Group.
  3. Click Create.
  4. Set affinity group parameters and click OK.

    The following table describes the parameters.

    Table 4-9 Affinity group parameters

    Parameter

    Setting

    Name

    Enter a name of the affinity group.

    Policy

    Set it to Anti-affinity.

Download
Updated: 2019-11-22

Document ID: EDOC1100011856

Views: 96028

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next