No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Local HA System Software Installation Guide (SUSE Linux + MySQL + OMMHA) 11

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a VM

Creating a VM

This section describes how to create two VMs functioning as the the active server and the standby server of eSight.

Creating a VM

The following describes how to create a VM functioning as the active server. After creating the VM, creating another VM functioning as the standby server.

  1. Log in to the FusionSphere OpenStack management console. The Google Chrome browser is recommended.

    1. Perform the following operations to log in to the FusionSphere OpenStack management console:

      Enter https://IP address of the FusionSphere OpenStack reverse proxy:8890 to log in to the installation deployment page of the FusionSphere OpenStack, choose Cloud Service > FusionSphere OpenStack OM, and click the FusionSphere OpenStack OM link to access the FusionSphere OpenStack management console.

    2. Set the view type to the administrator view, enter the user name and password, and log in.

      Set the user name and password to those collected in section "Collecting Information."

  2. Choose Resources > Computing > Computing Instances from the main menu.
  3. Click Create. The VM creation page is displayed.
  4. Select an AZ of the KVM type and click Next.
  5. Select the previously registered image (for example, VMxd_disk), set System Disk Type to Cloud Disk, set Storage SLA based on the plan, and click Next.
  6. Select the created VM specifications (for example, eSight_flavor) and click Next.
  7. Create networks.

    1. Select the project to which the network belongs and the corresponding network name, and add the system IP address network based on the plan.
      • IP : Set this parameter to Specified.
      • IPv4 : Set this parameter to the system IP address planned in Collecting Information.
      • Floating IP Address : Set this parameter to the floating application IP address planned in Collecting Information.
    2. Click Add NIC and configure the network where the heartbeat IP address is located based on the plan.
      • IP : Set this parameter to Specified.
      • IPv4 : Set this parameter to the heartbeat and replication IP addresses planned in Collecting Information.
      • Floating IP Address : Leave this parameter empty.
    3. (Optional) If southbound and northbound service isolation needs to be configured, click Add NIC and configure the corresponding network based on the plan.
      • IP : Set this parameter to Specified.
      • IPv4 : Set this parameter to the IP address for the southbound services planned in Collecting Information.
      • Floating IP Address : Set this parameter to the floating IP address for the southbound services planned in Collecting Information.

  8. Click Next.
  9. Set the parameters and click Next.

    Parameter

    Setting

    VM Name

    Set this parameter to the host name of active and standby eSight server in Collecting Information. This parameter for the active and standby servers is different.

    Host

    Set this parameter to different management nodes.

    VM Group

    Select a VM group created in Creating a VM Group.

  10. Verify parameter settings and click Complete.

    The process takes about 30 minutes. After the VM is created successfully, its status is Running in the VM list.

Download
Updated: 2019-11-22

Document ID: EDOC1100011856

Views: 96072

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next