No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Local HA System Software Installation Guide (SUSE Linux + MySQL + OMMHA) 11

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Process

Installation Process

Installation personnel should understand the installation tasks and process and reserve enough time for installing the eSight system.

Figure 2-1 shows the eSight installation process.

Figure 2-1 eSight installation process

Table 2-1 describes the eSight installation process.

Time Required in Table 2-1 is for reference only. The actual time required may be different from the listed time due to factors such as network conditions.

Table 2-1 eSight installation tasks


Time Required (Minutes)


Preparing for the Installation

Collecting Information


Before installation, you need to collect the information required for the installation, including the host name, IP address, user name, and password.

Operating System Requirements


The network scale and VM software and hardware configuration must be checked to ensure that eSight can be installed normally.

Obtaining and Verifying Software Packages


Before installing the eSight two-node cluster system, you should download the installation software packages, tool packages, and digital signature files from the Huawei support website and check the software package integrity to ensure that the downloaded software packages are available.

Uploading Software Packages


Before installing the eSight HA system, you need to create the corresponding installation directory and assign corresponding permissions on the directory, upload the downloaded software package to the installation directory, and decompress the software package

Installing eSight

Changing the Operating System Host Name


Different host names must be configured for the active and standby servers.

Configuring the Mapping Between the Host Name and IP Address


The mapping between the host name and IP address is correct.

Executing the Preprocessing Script


The trust relationship is set up between the active and standby servers.

Installing the eSight Software


This section describes how to install eSight in the SUSE Linux operating system.

Executing the Post-processing Script


This section describes how to execute the post-processing script on the standby server to install eSight and interconnect the active and standby eSight servers.

Checking System Installation


This section describes how to verify the installation.

Updated: 2019-11-22

Document ID: EDOC1100011856

Views: 94919

Downloads: 54

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next