No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Local HA System Software Installation Guide (SUSE Linux + MySQL + OMMHA) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Accessing the eSight Client Through the Domain Name

(Optional) Accessing the eSight Client Through the Domain Name

The eSight client can be accessed through the IP address or domain name. By default, the IP address is used for accessing the eSight client. To access the eSight client using the domain name, you need to import the domain name certificate on the eSight server and configure the DNS server information in the local PC.

Prerequisites

  • The mapping between the IP address and domain name of eSight has been configured on the DNS server.
  • You have obtained the domain name certificate, issuer public key, and password.
  • You have obtained the IP address of the DNS server.
  • You have stopped the eSight service, for the details you can see the Stopping eSight.

Procedure

NOTE:

For a local HA system, perform the operations only on the active server. For a remote HA system, perform the operations on both the active and standby servers.

  1. Import the domain name certificate using a certificate tool on the eSight server.

    1. Log in to the eSight server as the ossuser user.
    2. Start the certificate tool.

      > cd eSight installation directory/mttools/tools

      > ./catool.sh

    3. In the Certificate Tool dialog box, select Import CA Certificate and click Next.
    4. Set related parameters of the certificate and click Apply.

      Parameter

      Description

      Certificate

      Domain name certificate.

      Certificate Password

      Domain name certificate password.

      Issuer Public Key

      Issuer public key corresponding to the domain name certificate.

    5. Restart eSight, for the details you can see the Starting eSight.

  2. Configure the DNS server on the local PC.

    1. Open Network and Sharing Center.
    2. Click Local Area Connection.
    3. In the Local Area Connection Status area, click Properties.
    4. Double-click Internet Protocol Version 4(TCP/IPv4).

    5. On the Internet Protocol Version 4 (TCP/IPv4) page, select Use the following DNS server address and set Preferred DNS server to the IP address of the DNS server.

    6. Click OK.

  3. Use the domain name to access the eSight client.

    Enter https://eSight domain name:31943 in the address box of the browser and press Enter.

Download
Updated: 2019-09-02

Document ID: EDOC1100011856

Views: 91016

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next