No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Local HA System Software Installation Guide (SUSE Linux + MySQL + OMMHA) 11

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating VM Specifications

Creating VM Specifications

Before creating a VM, you need to create a VM specification based on the installation plan. If VM specifications that meet the requirements exist in the FusionSphere, you do not need to create them again.


  1. Log in to the FusionSphere OpenStack management console. The Google Chrome browser is recommended.

    1. Perform the following operations to log in to the FusionSphere OpenStack management console:

      Enter https://IP address of the FusionSphere OpenStack reverse proxy:8890 to log in to the installation deployment page of the FusionSphere OpenStack, choose Cloud Service > FusionSphere OpenStack OM, and click the FusionSphere OpenStack OM link to access the FusionSphere OpenStack management console.

    2. Set the view type to the administrator view, enter the user name and password, and log in.

      Set the user name and password to those collected in section "Collecting Information."

  2. Choose Resources > Computing > Flavors from the main menu.
  3. Click Create Flavor.
  4. Set the image registration parameters.

    The following table describes the parameters.




    Set it to VM.

    Boot Device

    Set it to Cloud Disk.


    Set it to the VM specification name, for example, eSight_flavor.


    Set it to the number of CPUs on the eSight server, for example, 24. For details, see Configuration Requirements.


    Set it to 32768.

    System Volume(GB)

    Set it to 500.

    Use the default values for other parameters.

  5. Click OK.
Updated: 2019-11-22

Document ID: EDOC1100011856

Views: 95010

Downloads: 54

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next