No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Local HA System Software Installation Guide (SUSE Linux + MySQL + OMMHA) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Process

Installation Process

Installation personnel should understand the installation tasks and process and reserve enough time for installing the eSight system based on the instructions.

Figure 4-1 shows the eSight installation and commission.

Figure 4-1 eSight installation process

Table 4-1 lists the eSight installation tasks.

Time Required in Table 4-1 is just for your reference. The actual time required may be different from the listed time due to factors such as network conditions.
Table 4-1 eSight installation tasks

Task

Time Required (Minutes)

Description

Preparing for the Installation

Downloading and Scanning Software Packages

50

Before installing the eSight two-node cluster system, installation personnel should download the installation software packages, tool packages, and digital signature files from the Huawei support website and check the software package integrity to ensure that the downloaded software packages are available.

Collecting Information

20

Installation personnel should collect site information before starting the installation. Site information includes the environment information and installation parameter information.

Installing eSight in Full Image Mode

Registering a VM Image

20

Installation personnel need to register the eSight image with the FusionSphere.

Creating VM Specifications

5

If specifications that meet the requirements exist on FusionSphere, you do not need to create the specifications.

Creating an Affinity Group

5

The VMs where eSight is deployed must belong to the same anti-affinity VM group. Before creating a VM, you need to create an affinity group on the ServiceCenter.

Creating a VM

30

Create two VMs as the active and standby servers for eSight.

Enabling the VM Watchdog

10

After VM creation is completed, the VM softdog needs to be enabled.

Configuring the OS

5

When VMs are created, the operating system installation is completed. Then the operating system needs to be configured and the name of the host running the operating system needs to be changed.

Connecting the Active and Standby Servers

15

To ensure the normal operation of eSight functions, turn off the operating system firewall.

Checking System Installation

10

After installing the active and standby servers of eSight, you need to connect them to form an HA system.

Download
Updated: 2019-09-02

Document ID: EDOC1100011856

Views: 91107

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next