No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Local HA System Software Installation Guide (SUSE Linux + MySQL + OMMHA) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling the Active/Standby Switchover

Disabling the Active/Standby Switchover

This topic describes how to limit the automatic active/standby switchover of the OMMHA.

Procedure

  1. Log in to the active eSight server as the ossuser user.
  2. Run the following command to disable the active/standby switchover:

    > cd /opt/ommha/ha/bin

    > ./forbiden_switch.sh forbiden time

    NOTE:

    In the preceding command, time indicates the duration during which the switchover is disabled, which is expressed in minutes.

  3. The following information indicates that the operation is performed successfully:

    Congratulations, exec successfully.

Download
Updated: 2019-09-02

Document ID: EDOC1100011856

Views: 91287

Downloads: 53

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next