No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Single-Node System Software Installation Guide (SUSE Linux) 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installation Process

Installation Process

This topic describes the processes for installing eSight on SUSE Linux in single-node modes in a pre-installation scenario.

NOTE:

In a distributed scenario, the primary server has been pre-installed based on the described operations in this chapter. The distributed server is not pre-installed. If you want to install it, see Installing the eSight System (Full Installation).

Figure 4-1 Installation process
Table 4-1 Installation process

Task

Time Required (Minutes)

Description

Preparing for the Installation

Obtaining eSight Installation Software

20

Before installing the eSight two-node cluster system, installation personnel should download the installation software packages and digital signature files from the Huawei support website and check the software package integrity to ensure that the downloaded software packages are available.

Preparing Installation Tools

20

Before installing eSight, prepare necessary tools.

eSight Server Installation Plan

15

This topic describes how to plan installation information, such as the IP address, host name, and password, to help correctly install eSight.

Powering On a Server

5

This topic describes how to power on a server.

Modifying Operating System Preinstallation Parameters

Changing the IP Address and Host Name of the Operating System

5

Reconfigure the host name and IP address of the eSight server operating system based on the plan.

Changing the Operating System Date and Time Zone

5

After changing the operating system date and time zone, restart eSight to make the configuration take effect.

Changing the Password of the root User

5

You can change the password of the root user to improve operating system security.

(Optional) Installing the Operating System Patches

5

You can install the operating system patches on the eSight server to improve operating system security.

Modifying Database Preinstallation Parameters

(Optional) Installing the Oracle Patch

10

The topic is describes how to install the oracle patch.

Modifying Running Parameters of the Oracle Database

5

You can execute the Oracle configuration script to optimize the database running memory and enable the scheduled task for clearing the database audit logs.

Changing the Password of a Database User

5

Use the maintenance tool to change the administrator password and common user passwords of the databases during routine maintenance, which ensures database security.

(Optional) Connecting the Distributed Server and the eSight Server

10

Perform this operation in the distributed scenario.

Installing eSight (Incremental Installation)

20

In this scenario, you have purchased, installed, and used the eSight software. After that, you have purchased new eSight components to satisfy service requirements. This mode is also applicable if you have purchased components that do not support preinstallation.

Verifying the Installation

20

After the eSight is installed, verify the installation.

Download
Updated: 2019-05-17

Document ID: EDOC1100011860

Views: 92824

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next