No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Single-Node System Software Installation Guide (SUSE Linux) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Obtain the IP Address of eSight

How to Obtain the IP Address of eSight

Question

Currently, eSight supports southbound and northbound isolation and non-isolation scenarios. In the two scenarios, eSight uses different IP addresses to communicate with external systems. How to obtain the eSight IP address in the corresponding scenario?

Answer

  1. Check the IP address type.

    Figure 12-3 shows the interaction principle between eSight and the device, client, and distributed server.

    Figure 12-3 Interaction principle between eSight and external devices
    Table 12-6 IP address type

    Scenario

    IP Address Type

    Description

    Southbound and northbound isolation scenario

    System/application management IP address

    NOTE:

    In a local HA system, the system/application IP address is the floating IP address of the HA system.

    The IP address is used for eSight to interact with upper-level NMSs, clients, and third-party systems.

    Southbound device management IP address

    NOTE:

    In a local HA system, the southbound device management IP address is the southbound floating IP address of the HA system.

    The IP address is used for eSight to interact with devices and distributed servers.

    Southbound and northbound non-isolation scenario

    System/application management IP address

    NOTE:

    In a local HA system, the system/application IP address is the floating IP address of the HA system.

    The system/application management IP address is the same as the southbound device management IP address. The IP address is used for eSight to interact with external systems.

  2. Obtain the IP address.

    • Windows operating system
      1. Log in to the server as the Administrator user.
      2. On the CLI and run the following commands:

      cd /d eSight installation directory/mttools/tools

      southip.bat show

      The following information is displayed:

      Indicates whether the southbound IP address is enabled: Yes
      System IP Address: 10.120.50.118
      South IP Address: 192.168.1.123
      Table 12-7 Parameters in the Windows scenario

      Parameter

      Description

      Example

      Indicates whether the southbound IP address is enabled

      Indicates whether to enable the southbound and northbound isolation function. The options are as follows:

      • Yes
      • No

      Yes

      System IP Address

      System/application management IP address.

      10.120.50.118

      South IP Address

      Southbound device management IP address.

      192.168.1.123

    • Linux operating system
      1. Log in to the server as the ossuser user.
        NOTE:

        In a two-node cluster system, you need to log in to the active server and perform the following operations.

      2. Go to the following directory:

        > cd eSight installation directory/mttools/tools

      3. Execute the following script:

        > ./southip.sh show

        The following information is displayed:

        Indicates whether the southbound IP address is enabled: Yes
        System IP Address: 10.120.50.118
        South IP Address: 192.168.1.123
        Table 12-8 Parameters in the Linux scenario

        Parameter

        Description

        Example

        Indicates whether the southbound IP address is enabled

        Indicates whether to enable the southbound and northbound isolation function. The options are as follows:

        • Yes
        • No

        Yes

        System IP Address

        System/application management IP address.

        10.120.50.118

        South IP Address

        Southbound device management IP address.

        192.168.1.123

Download
Updated: 2019-08-10

Document ID: EDOC1100011860

Views: 96044

Downloads: 144

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next