No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Single-Node System Software Installation Guide (SUSE Linux) 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the eSight Infrastructure Management Maintenance Tool

Logging In to the eSight Infrastructure Management Maintenance Tool

The eSight Infrastructure Management Maintenance Tool uses the browser/server (B/S) working mode. You can manage and maintain the Infrastructure Management system server after logging in to the eSight Infrastructure Management Maintenance Tool over the browser on a PC.

Prerequisites

  • The browser version is Internet Explorer 9/10/11, Firefox 38ESR, Chrome 43.
    NOTE:

    To achieve better WebUI viewing effect, you are advised to use Internet Explorer 11 and set the resolution of the PC to 1366x768 or higher.

  • The IP address of the Infrastructure Management server has been obtained.
  • The PC communicates with the Infrastructure Management server properly.

Procedure

  1. In the browser address bar, enter https://IP address of the Infrastructure Management server:32804/, and then press Enter.
  2. Enter the User Name, Password and Verification code on the login page and click Log In.

    NOTE:

    The default user name for theeSight Infrastructure Management Maintenance Tool is admin and the default password is Changeme_123. You need to change the password periodically (at an interval of 60 days) to improve system security.

    After you enter the incorrect password for three consecutive times, you must enter the verification code upon the fourth login. After you enter the incorrect password for five consecutive times, the user account or the IP address is locked.

Follow-up Procedure

To exit the eSight Infrastructure Management Maintenance Tool, click Log Out in the upper-right corner of the page or close the browser.

Download
Updated: 2019-05-17

Document ID: EDOC1100011860

Views: 92504

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next