No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Single-Node System Software Installation Guide (SUSE Linux) 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing eSight in Silent Mode (Single-Node System)

Installing eSight in Silent Mode (Single-Node System)

Procedure

  1. Log in to the active eSight server as the root user.
  2. Run the following command to create the temporary directory /opt/install:

    # mkdir -p /opt/install

  3. Use FileZilla to upload the software package to the /opt/install directory as the root user. For details about how to use FileZilla, see How Do I Use FileZilla to Transfer Files.

    NOTE:

    When installing eSight using the CD-ROM, you need to copy the software package to the installation directory in advance.

  4. Run the following commands on the CLI to decompress the installation package:

    # cd /opt/install

    # unzip eSight_VxxxRxxxCxxxSPCxxx_SUSE.zip-d/opt/install/eSight

    In the command, eSight_VxxxRxxxCxxxSPCxxx_SUSE.zip is the eSight installation package.

  5. Run the following commands in the directory to which the installation packages are decompressed.

    # cd /opt/install/eSight

    # cd etc/config

    # vi silent_suse_appbase.properties

    #Installation language (Chinese:zh English:en) 
    InstallLang=en  
    
    #IP Address Type: 0--IPv4, 1--IPv6, 2--IP Dual-stack 
    IpType=0  
    
    #NMS IPV4 Address 
    HostIP=10.137.59.72 
    
    #NMS IPV6 Address 
    HostIPV6=  
    
    #web server port 
    WebServerPort=8080  
    
    #The install path, installDir can not null and the path must be composed of characters or numbers or "-" or "_", 
    #and the length of the path must be less than 60 characters, and it is invalid to have space before "\" or "/" or ":". 
    InstallDir=/opt/eSight  
    
    #Database Type :Oracle:0 database type (0: oracle) 
    DBType=0  
    
    #DB server port. oracle database listening port 
    DBPort.oracle=31521  
    
    #DB SID. oracle database instance 
    DBSID.oracle=esight
    NOTE:
    • InstallLang: specifies the installation language. Set InstallLang to zh if you install a Chinese version. Set InstallLang to en if you install an English version. The language cannot be changed after the installation is complete. To use the other language, you must reinstall eSight.
    • IpType: specifies the IP address type of the eSight server. eSight supports IPv4 addresses, IPv6 addresses, and dual stack. Select an IP type based on your network planning.
    • HostIP: specifies an IPv4 address for a host. Set this parameter when IpType is set to IPv4 or IP Dual-stack.
    • HostIPV6: specifies an IPv6 address for a host. Set this parameter when IpType is set to IPv6 or IP Dual-stack.
    • WebServerPort: specifies the port number of the web server. The default value is 8080. If port 8080 is in use, change it to another port number.
    • InstallDir: specifies the installation directory. The default directory /opt/eSight is recommended. You can also set InstallDir to other directory. Do not install eSight in a system directory, such as /root or /etc.
    • Ensure that the eSight installation directory is empty. If not, eSight installation fails.
    • DBPort.oracle: specifies the listening port of the Oracle database. The value is 31521. The port must be the same as the listening port set during Oracle database installation.
    • DBSID.oracle: specifies the database instance. It must be the same as the instance name set during Oracle database installation.

  6. Run the silent installation script.

    # cd /opt/install/eSight
    # cd scripts/
    # chmod u+x silent_suse_appbase.sh
    # sh silent_suse_appbase.sh

    Enter the password of the database administrator system and press Enter.

  7. It takes about 10 minutes to complete the process. Please wait patiently. If the following information is displayed, eSight is installed successfully.

    ===============< Installation Completed >=============== 
    Finish

Download
Updated: 2019-08-10

Document ID: EDOC1100011860

Views: 96057

Downloads: 144

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next