No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Single-Node System Software Installation Guide (SUSE Linux) 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Collecting Information

Collecting Information

Before installation, you need to collect the information required for the installation, including the server information.

Table 5-39 Server information to be collected

Item

Sub-item

Default Value

Description

2288H V5 server

IP address of the management port

  • Default IP address: 192.168.2.100
  • Default subnet mask: 255.255.255.0

If the IP address of the server management port is not in the same network segment as the IP address of the maintenance PC, configure the IP address of the management port based on How Do I Change the IP Address of the Management Port on the 2288H V5 Server. Ensure that the IP addresses are in the same network segment.

User name and password for logging in to the iBMC management system

  • Default user name: Administrator
  • Default password: Admin@9000

-

BIOS password

  • Default password: Admin@9000

-

RH5885H V3 server

IP address of the management port

  • Default IP address: 192.168.2.100
  • Default subnet mask: 255.255.255.0

If the IP address of the server management port is not in the same network segment as the IP address of the maintenance PC, configure the IP address of the management port based on How Do I Change the IP Address of the Management Port on the RH5885H V3 Server.

User name and password for logging in to the iBMC management system

  • Default user name: root
  • Default password: Huawei12#$

-

BIOS password

  • Default password: Huawei12#$

-

Download
Updated: 2019-05-17

Document ID: EDOC1100011860

Views: 92070

Downloads: 136

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next