No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Single-Node System Software Installation Guide (SUSE Linux) 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Starting the eSight Service

Starting the eSight Service

This topic describes how to start the eSight service.

Prerequisites

Ensure that the Oracle database has started.

Context

By default, the eSight service starts with the operating system.

NOTE:

The methods for setting the eSight startup mode are as follows:

  • Run the chkconfig eSightService off 2>/dev/null command as the root user to disable eSight automatic startup.
  • Run the chkconfig eSightService on 2>/dev/null command as the root user to enable eSight automatic startup.

Procedure

  1. Start the eSight service.

    1. Log in to the eSight server as the ossuser user.
    2. Run the following commands to start the eSight service.

      > cd eSight installation directory/bin

      > ./startup.sh

      When the status of every process is RUNNING and starting eSight system succeeded is displayed, the eSight service has been started.

  2. Optional: If the NTC is installed on a different host, manually start the NTC service.

    1. Log in to the NTC server as the ossuser user.
    2. Run the following commands to start the NTC service.

      > cd eSight installation directory/bin

      > ./startup.sh

      When the status of every process is RUNNING and starting eSight system succeeded is displayed, the NTC service has been started.

  3. Optional: If the WLAN location server is installed on a different host, manually start the WLAN location service.

    1. Log in to the WLAN location server as the ossuser user.
    2. Run the following commands to start the WLAN location service.

      > cd eSight installation directory/bin

      > ./startup.sh

      When the status of every process is RUNNING and starting eSight system succeeded is displayed, the WLAN location service has been started.

Download
Updated: 2019-05-17

Document ID: EDOC1100011860

Views: 92195

Downloads: 138

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next