No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Preparations for Operation and Maintenance

Preparations for Operation and Maintenance

To monitor Redhat OpenStack in a better way, set synchronization policies and alarm rules in advance to ensure smooth operations of key devices.

Task Name

Task Description

Operation Entry

Configuring synchronization policies

Data synchronization

Recommended.

Redhat OpenStack cannot automatically report all resource changes to eSight, for example, migration of VMs on host. eSight needs to actively obtain the changes from Redhat OpenStack.

If resource synchronization is disabled, eSight will not be able to detect Redhat OpenStack resource changes.

  1. Choose Resource > Virtual Resources from the main menu.
  2. Choose Virtual Resources > Redhat OpenStack in the navigation area on the left.
  3. Above the Redhat OpenStack list on the right, click Synchronize Data and choose Settings.
  4. Set Time Switch to ON, and set the timing policy and hour.

Performance synchronization

Recommended.

Redhat OpenStack cannot automatically report performance statistics to eSight. eSight needs to actively obtain the statistics from Redhat OpenStack.

If performance synchronization is disabled, eSight cannot display Redhat OpenStack performance statistics.

If you do not care about Redhat OpenStack performance statistics, you can disable performance synchronization.

NOTE:

For Redhat OpenStack, eSight support the interval 10 to 30 mins

  1. Choose Resource > Virtual Resources from the main menu.
  2. Choose Virtual Resources > Redhat OpenStack in the navigation area on the left.
  3. Set Historical performance acquisition switch of the NE to ON.

Setting alarm rules

Alarm masking

Alarm masking rules can be specified to prevent devices from reporting unnecessary alarms during site deployment, commissioning, or maintenance, simplifying alarm handling.

  1. Choose Fault > Alarm Settings from the main menu.
  2. Choose Masking Rule in the navigation area on the left.

Redefining

Adjust alarm severities to ensure smooth operation of network devices in a specific area or some key devices and provide quality network assurance services. (For example, high severities can be assigned to important alarms so that network maintenance engineers will handle the alarms preferentially.)

  1. Choose Fault > Alarm Settings from the main menu.
  2. Choose Redefinition Rule in the navigation area on the left.

Remote notification

eSight can send alarms and events to network maintenance engineers by email or SMS message. In this way, they can check and handle alarms and events even when they are unable to access eSight.

  1. Choose Fault > Alarm Settings from the main menu.
  2. Choose Notification Rule in the navigation area on the left.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 283828

Downloads: 542

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next