No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How to Handle the IP Address Configuration Problem in the Southbound and Northbound Isolation Scenario of eSight

How to Handle the IP Address Configuration Problem in the Southbound and Northbound Isolation Scenario of eSight

Question

In the southbound and northbound isolation scenario of eSight, if the SBC is deployed between eSight and terminals, you need to configure the configuration file of eSight and change the values of the elastic IP address of the file server and the external access IP address of the STUN server to the IP address at the SBC access side.

Answer

The operations on the SUSE Linux operating system and Windows are similar. The SUSE Linux is taken as an example.

  1. Log in to the eSight server as the ossuser user.
  2. Config the elastic IP address of the file server.

    cd eSight installation directory/AppBase/etc/uc

    vi config.properties

    The following information is displayed:

    #static NET ip 
    elastic.server.ipaddr=10.180.141.233

    Change the value of elastic.server.ipaddr to the IP address at the SBC access side.

  3. Press Esc and enter :wq to save and exit.
  4. Config the external access IP address of the STUN server.

    cd eSight installation directory/AppBase/etc/uc

    vi ems_config_readWriter.properties

    The following information is displayed:

    stun.out.ip=10.180.141.233

    Change the value of stun.out.ip to the IP address at the SBC access side.

  5. Press Esc and enter :wq to save and exit.
  6. Restart eSight for the configuration to take effect.
Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 315072

Downloads: 637

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next