No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Cell eRAN Monitor

Cell eRAN Monitor

This function helps monitor resource information about devices cells in real time.

Prerequisites

  • You have logged in to the eSight client
  • You have the real-time resource monitoring right.

Procedure

  1. Choose Resource > eLTE > Fault Diagnosis > Cell eRAN Monitor from the main menu.
  2. Click Create Task.
  3. Set task parameters based on the site requirements.

    • Set Task Name.
    • The Period is set to 1000ms by default.
    • Click next to Start Time and End Time respectively to set the start time and end time.

  4. Select monitoring objects.

    1. Click Select Monitoring Object.
    2. In the dialog box that is displayed, select NEs to monitor, and click OK.

  5. Select monitoring information.

    1. In Select Trace Type, select a trace type.

      Test items are displayed.

    2. Select test items.

  6. Click OK.

Follow-up Procedure

After the task is created, you can perform the following operations on the Cell eRAN Monitor page.

Task

Operator

Search Task

  1. Click on the search bar.
  2. Set the search criteria on the page that is displayed.
    • Select State, Monitor Type.
    • Set Task Name.
    • Select Real Start Time, Real End Time
    • In More, click Device Name, Cell ID, and Error Cause respectively, and enter the search criteria.
  3. Click Search.

Import Task

  1. Click Import above the table.
  2. In the window that is displayed, set the Task Name.
  3. Click next to File Path, select the prepared file and click Open.
  4. Click Upload.

Query Task

  1. Click before a task to query.
  2. Task details are displayed.

Start Task

  • Start a single task.

    In the Operation column of a task, click.

  • Start tasks in a batch.
    1. Select tasks you want to start.
    2. Click Start above the list.

Stop Task

  • Stop a single task.

    In the Operation column of a task, click.

  • Stop tasks in a batch.
    1. Select tasks you want to stop.
    2. Click Stop above the list.

Delete Task

  • Delete a single task

    In the Operation column of a task, click.

  • Delete in batches
    1. Select tasks to delete.
    2. Click Delete Task in the upper part of the table.

Export Task

  1. In the Operation column of a task, click.
  2. Select the file path and click OK.
NOTE:

To ensure the file readability, you can add the device identifier or device group identifier such as the device IP address, name, and range identifier of the device to the task name.

Query Real-Time Monitoring Data

  1. Click the name of a task to query.
  2. Turn on Real-Time Refresh on the page that is displayed.
  3. Select indicators under Chart Display Item on the left.
  4. Real-time data is automatically refreshed.
NOTE:

After Real-Time Refresh is turned off, the data will not be refreshed, but monitoring tasks continue. Users can drag the time axis under the table to check data.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 315992

Downloads: 639

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next