No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Operation Procedure

Operation Procedure

This section describes the how to manage SVF configurations of devices using eSight, helping you quickly master SVF configuration management.

Table 12-21 Operation procedure of SVF configuration management

Step

Operation

Description

1

Set protocol parameters on the device: SNMP and Telnet

  • If SNMP is used, the MIB view including ISO nodes must be configured. SNMPv2c read and write permissions are mandatory.

    For details about how to configure the SNMP protocol on the device, see Configuring the SNMP Protocol on Devices.

  • The Telnet privilege mode on eSight must be the same as that on the device.

    For details about how to set Telnet parameters on the device, see Setting Telnet Parameters on Devices.

2

Add devices to eSight.

Select a proper device addition mode based on the site requirements.

For details about how to add devices to eSight, see Adding Devices to eSight.

3

Configure parent nodes to constitute a CSS.

Configure parent nodes to constitute a CSS can ensure high reliability of the SVF. For details about the configuration procedure and configuration notes, see CSS Configuration in Configuration Guide.

4

Create and deliver system configuration templates.

Configure system configuration parameters for connecting ASs to the parent node based on the access layer planning of the live network.

5

Delete the configurations of the ASs, restart them, and connect related cables.

After cable connections, the ASs are connected to the parent node to form an SVF system.

NOTE:

If a message is displayed asking you to save the configuration during the device restart, select N.

6

Create and deliver service and maintenance configuration templates.

Configure VLANs, QoS, and access authentication services for the ASs based on site requirements.

If services are configured by port group, create port groups first.

7

View the SVF deployment result on the topology management page.

Evaluate the SVF deployment result based on the topology networking and link status and view the access user list.

Creating and Delivering System Configuration Templates

  1. Choose Resource > Network > Configuration > SVF Configuration Management from the main menu.

  2. In the navigation tree, on the left, choose Template Management and create system configuration templates based on the planning of the live network.
  3. In the navigation tree on the left, choose Service Config > SVF System Config to deliver system configuration templates to the parent device.

Creating and Delivering Service and Maintenance Configuration Templates

  1. Choose Resource > Network > Configuration > SVF Configuration Management from the main menu.

  2. In the navigation tree on the left, choose Template Management and create service and maintenance configuration templates based on site requirements.
  3. In the navigation tree on the left, choose Service Config > SVF Port Config to deliver service configuration templates.
  4. In the navigation tree on the left, choose Service Config > SVF Maintenance to deliver maintenance configuration templates.

Viewing the SVF Deployment Result on the Topology Management Page

  1. Choose Topology > Topology Management from the main menu.

  2. Find an SVF device, double-click it to view the topology and link status, and check whether the information is the same as that of onsite planning.
Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287615

Downloads: 554

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next