No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing PON Ports

Managing PON Ports

This topic describes how to query information about OLT PON ports and operations related to PON ports.


An OLT has been added to eSight.


  1. Choose Resource > PON from the main menu.
  2. Choose PON Resource > Device from the navigation tree on the left.

  3. Choose an OLT device and click the Name of a record.

  4. Choose Device Config > PON Port Manager from the navigation tree.
  5. In the list, you can view the following information about the PON port: operation status, runtime status, name, alias, minimum distance, maximum distance, downstream FEC, and ONU auto discovery.

Related Operation

Related Operation



To synchronize the PON port status.

To modify the alias of the PON port.

To view the PON port performance data on the Performance Data tab.

Enable GPON UNI Port

To open the laser of a GPON UNI port.

Disable GPON UNI Port

To close the laser of a GPON UNI port. If you do not want the ONUs connected to a GPON UNI to go online, close the laser of the GPON UNI port.

Enable ONU Auto Discovery

To enable ONU auto-discovery for a GPON UNI port. After this function is enabled, the OLT regularly checks whether new ONUs connected to the GPON UNI port go online.

Disable ONU Auto Discovery

To disable ONU auto-discovery for a GPON UNI port. After this function is disabled, the OLT does not check whether new ONUs connected to the GPON UNI port go online.

Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 332740

Downloads: 664

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next