No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
eNodeB

eNodeB

eSight can manage base stations added to it in a centralized manner.

Procedure

  1. Choose Resource > eLTE > Resource Monitor > eNodeB from the main menu.

    Table 18-10 Description of the eNodeB page

    Area

    Description

    1. Toolbar

    Description

    2. Device display information

    Displays basic device information and operations.

    Connection Status

    Connection status of the device, which can be Offline or Online.

    NOTE:

    If the device status is online, but in the eNodeB device registration information list, the Connection Status column is , Please:

    • Check the mediation software is installed for the NE.
    • Check the device type you selected is matched with the NE.

    Name

    Device name.

    IP Address

    Device IP address.

    eNodeB ID

    Device identifier.

    Device Type

    Device model.

    Software Version

    Device software version.

    Vendor

    Device vendor.

    Last Modified At

    Last time when the device is modified.

    Device Creation Time

    Time when the Device is created.

    Device Creation Mode

    Mode in which the Device is created.

    Inaccessibility Duration(s)

    Total length in offline state after the device is automatically added to eSight.

    Geographical Location

    Physical location of the device.

    Management Status

    Management status of the device, which can be Normal or Disable.

    Last Synchronized At

    Last time when information is synchronized on the device.

    Remark

    Device description.

    Operation

    You can perform the following operations: Locate in Topology, Modify, Delete, and Reset Password.

    Select items to be displayed in the device information list.

  2. You can perform the following operations on the eNodeB page.

    Task

    Operator

    Search device

    1. Click on the search bar.
    2. Set the search criteria.
    3. Select Connection status.
    4. Set Subnet, Name, IP address, and Last synchronized at.
    5. In More, click Device type, Location, and Remark respectively, and enter the search criteria.
    6. Click Search.

    Add eNodeB devices

    • Add a single eNodeB device.
      1. Click Add. The Add Device page is displayed.
      2. Set the IP address, Name, subnet, Device type, Connection mode and Allow anonymous.
      3. Click OK.
    • Add eNodeB devices in a batch.
      1. Click Import. The Import Devices page is displayed.
      2. Click Template.xls to download a template to a local device.
      3. Open the template, enter device information, and save the template.
      4. Click next to Upload resource file to select the locally saved template.
      5. Click OK.
      NOTE:
      • eSight automatically creates a subnet recorded in the template.
      • If the template contains incorrect content or eNodeB devices that have been added to eSight, the template cannot be successfully loaded.

    Delete devices

    You can delete information about eNodeBs when eSight no longer manages these eNodeBs.

    • Delete information about a single eNodeB.
      1. Click next to the target eNodeB.
      2. Click Yes in the Confirm dialog box.
    • Delete information about multiple eNodeBs in a batch.
      1. Select eNodeBs you want to delete.
      2. Click Delete above the list.
      3. Click Yes in the Confirm dialog box.

    Synchronize Configuration

    You can perform this operation to synchronize eNodeB configuration data.

    • Start synchronization
      1. Select the eNodeB to be synchronized in the eNodeB information list.
      2. Click Synchronize Configuration and select Start Synchronization.
    • Config Sync Mgmt
      1. Click Synchronize Configuration and select Config Sync Mgmt.
    • Parameter settings
      1. Click Synchronize Configuration and select Parameter settings.
      2. Set Scheduled task to Open.
      3. Select Timing strategy based on actual needs, and set the time.
      4. Click OK.

    Move

    You can perform this operation to modify the subnet of the device.

    1. Select a eNodeB to be adjusted and click Move.
    2. Select the target eNodeB on the Move page and click OK.
    3. Click Yes in the Confirm dialog box.

    Locate in Topology

    Click next to the eNodeB in the device list. The Topology Management page is displayed. For details on topology management operations, see Physical Topology Management.

    Modify eNodeB information

    You can perform this operation to modify eNodeB information.

    1. Click next to the target eNodeB. The page for modifying eNodeB information is displayed.
    2. Modify eNodeB information on the page that is displayed.
    3. Click OK.

    Reset Password

    You can perform this operation to modify the password of the emscomm account.

    1. Click next to the target eNodeB.
    2. On the page that is displayed, modify the password of the emscomm account.
    3. Click OK.

    View Industry Terminal

    You can perform this operation to view Industry Terminals in the corresponding eNodeB.

    1. Click next to the target eNodeB.
    2. View Industry Terminal information on the page that is displayed.

    NOTE:

    You can click on the upper right corner of the eNodeB device list to filter display information.

Basic Information

The Basic Information page displays the basic eNodeB information and operation information.

DBS3900 LTE

Table 18-11 Operations

Operation

Description

Procedure

Refresh

Allows you to refresh information on the page.

Click Refresh to refresh information on the page.

Ping

Allows you to check the connectivity between the device and the server.

Prerequisite: ICMP has been enabled on the eNodeB to be tested.

  1. Click Ping. The IP Ping page is displayed.
  2. On the IP Ping page, set Packet size and Times.
    NOTE:

    Select the proper data packet size based on the firewall configuration.

  3. Click Ping.
  4. The ping result is displayed.

Web NMS

eSight provides a shortcut entry to web page management for managing eNodeBs.

Perform operations on the web page as required.

NOTE:

If you are denied access to the Web LMT of eNodeB, please connect the administrator.

Configuration synchronization

Allows you to synchronize configuration data.

Click Synchronize Configuration. eSight starts to synchronize configuration data.

View Topology

Allows you to view the device in the network topology.

Click View Topology. You can view the device topology on the Topology Management page.

KPI

Allows you to view device KPIs within a specific time segment.

Select a time unit and determine the time segment by dragging the ruler on the timeline. KPIs within the time segment will be displayed.

View the Ethernet port

Allows you to view the Ethernet port of the device.

Click in front of the port to be viewed for relevant information.

eAN3710

Table 18-12 Operations

Operation

Description

Procedure

Refresh

Allows you to refresh information on the page.

Click Refresh to refresh information on the page.

Ping

Allows you to check the connectivity between the device and the server.

Prerequisite: ICMP has been enabled on the eNodeB to be tested.

  1. Click Ping. The IP Ping page is displayed.
  2. On the IP Ping page, set Packet size and Times.
    NOTE:

    Select the proper data packet size based on the firewall configuration.

  3. Click Ping.
  4. The ping result is displayed.

Configuration synchronization

Allows you to synchronize configuration data.

Click Synchronize Configuration. eSight starts to synchronize configuration data.

View Topology

Allows you to view the device in the network topology.

Click View Topology. You can view the device topology on the Topology Management page.

KPI

Allows you to view device KPIs within a specific time segment.

Select a time unit and determine the time segment by dragging the ruler on the timeline. KPIs within the time segment will be displayed.

eAN3810

Table 18-13 Operations

Operation

Description

Procedure

Refresh

Allows you to refresh information on the page.

Click Refresh to refresh information on the page.

Ping

Allows you to check the connectivity between the device and the server.

Prerequisite: ICMP has been enabled on the eNodeB to be tested.

  1. Click Ping. The IP Ping page is displayed.
  2. On the IP Ping page, set Packet size and Times.
    NOTE:

    Select the proper data packet size based on the firewall configuration.

  3. Click Ping.
  4. The ping result is displayed.

Configuration synchronization

Allows you to synchronize configuration data.

Click Synchronize Configuration. eSight starts to synchronize configuration data.

View Topology

Allows you to view the device in the network topology.

Click View Topology. You can view the device topology on the Topology Management page.

KPI

Allows you to view device KPIs within a specific time segment.

Select a time unit and determine the time segment by dragging the ruler on the timeline. KPIs within the time segment will be displayed.

eNodeB Resource

This topic describes how to export and back up resources.

Prerequisites

  • You have logged in to the eSight client.
  • You have been assigned the operation rights.

Procedure

  1. Choose Resource > eLTE > Resource Monitor > eNodeB from the main menu to enter the eNodeB page. The corresponding page is displayed.

    Perform the following operations on the eNodeB resource page.

    Task

    Operation

    Export

    You can perform this operation to view backup resource information.

    1. Click Export and choose Export selected or Export all.
    2. Open or Save the information.

    Refresh

    Refresh the information of resource on current page.

    Status Browse

    You can perform this operation to view resource details.

    1. Click .
    2. Browse detail information of the resource on new page.

    Status Query

    You can perform this operation to browse resource status.

    1. Click .
    2. Browse status of the resource on the page that is displayed.

NTP Synchronization Management

This chapter describes the steps of manage network time protocol (NTP) client and global positioning system (GPS).

NTP Client

This topic describes how to export and back up information about NTP Client.

Prerequisites

  • You have logged in to the eSight client.
  • You have been assigned the operation rights.

Procedure

  1. In the navigation tree in the left pane, choose NTP Synchronization Management > NTP Client.

    You can perform the following operations on the NTP Client page.

    Task

    Operator

    Export

    You can perform this operation to view backup information about NTP Client.

    1. Click Export and choose Export selected or Export all.
    2. Open or Save the information of NTP client.

    Refresh

    Refresh the information of NTP client on current page.

    Status Browse

    You can perform this operation to browse NTP Client details.

    1. Click .
    2. Browse detail information of NTP client on new page.

    Status Query

    You can perform this operation to browse NTP Client status.

    1. Click .
    2. Browse status of NTP Client on the page that is displayed.

GPS Management

This topic describes how to export and back up GPS information.

Prerequisites

  • You have logged in to the eSight client.
  • You have been assigned the operation rights.

Procedure

  1. In the navigation tree in the left pane, choose NTP Synchronization Management > GPS.

    You can perform the following operations on the GPS page.

    Task

    Operation

    Export

    You can perform this operation to view backup GPS information.

    1. Click Export and choose Export selected or Export all.
    2. Open or Save the information of GPS.

    Refresh

    Refresh the information of GPS on current page.

    Status Browse

    You can perform this operation to view GPS details.

    1. Click next to the target GPS.
    2. Browse the information of GPS on new page.

    Status Browse

    You can perform this operation to browse GPS status.

    1. Click next to the target GPS.
    2. Browse status of GPS on the page that is displayed.

Exporting Files

This topic describes how to back up and export configuration files and license files.

Configuration Files

This topic describes how to back up and export configuration files.

Prerequisites

  • You have logged in to the eSight client.
  • You have been assigned the operation rights.

Procedure

  1. In the navigation tree in the left pane, choose File Export > Configuration File.

    You can perform the following operations on the Configuration File page.

    Task

    Operation

    Back up

    1. Click Generate Backup File. In the File Back Up Setting dialog box enter File Encryption Password and click OK. The backup progress bar is displayed on the top of the page.
      NOTE:

      It is recommended to select encryption methods to export configuration files. By default, File Encryption Switch is set to on.

    2. After backup is completed, click OK in the dialog box that is displayed.

    Upload

    1. Select the configuration file to be exported and click Uploaded To Server. The progress bar is displayed on the top of the page.
    2. After export is completed, click OK in the dialog box that is displayed.

License

This topic describes how to export license files.

Prerequisites

  • You have logged in to the eSight client.
  • You have been assigned the operation rights.

Procedure

  1. In the navigation tree in the left pane, choose File Export > License File.
  2. Select license files you want to export and click Uploaded To Server.
  3. Click OK.
Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 332917

Downloads: 667

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next