No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 09

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Single IoT Device

Adding a Single IoT Device

Before you manage IoT devices using eSight, register and authenticate them.

Prerequisites

  • eSight IoT Device Manager component has been installed.
  • You have logged eSight client.
  • You have obtained the information of the device.
  • You have been assigned the operation rights of managing the IoT object groups and IoT devices.

Procedure

  1. Choose Resource > Common from the main menu. Then choose Add Resource > Add Resource in the navigation tree on the left. The Add Resource page is displayed.
  2. Choose IoT > IoTNE.
  3. Enter IoT information.

    • Enter IP address and Name and select Subnet and Device type in Basic Information.
    • Optional: Set Backup IP address.
    • Set SNMP parameters.
      NOTE:

      Contact the NE administrator for SNMP parameters.

  4. Click Apply.

    NOTE:

    If you want to register other IoT devices, repeat the preceding steps to specify the desired registration information on the current page. If you have finished IoT device registration, click OK.

  5. Click Yes in the Confirm dialog box.
  6. Verify the registration information.

    NOTE:

    If the adding is successful, eSight will initiate a connection to the IoT device. In the IoT device registration information list, if the management status of the IoT device changes from Offline to Online in the Connection Status column, the IoT device is successfully registered.

Download
Updated: 2019-05-17

Document ID: EDOC1100011877

Views: 287782

Downloads: 554

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next