No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring OLT Uplink Interface

Monitoring OLT Uplink Interface

eSight monitors the status of the link between the OLT and an upstream device, and the sending/receiving packet loss rate and bandwidth usage of the OLT uplink interface.

Prerequisites

Before eSight can monitor the sending/receiving packet loss rate and bandwidth usage of the OLT uplink interface, complete the following operations to customize OverView of the GPON management module.

  1. Choose Resource > PON from the main menu.
  2. Click in the OverView window.
  3. In the Customize window that is displayed, click next to TopN OLT Ethernet Port Receive Bandwidth Utilization, TopN OLT Ethernet Port Send Bandwidth Utilization, TopN OLT Ethernet Port Receive Packet Loss Rate, and TopN OLT Ethernet Port Send Packet Loss Rate to complete customization.

Procedure

  1. Monitor the status of the link between the OLT and an upstream device.

    Monitor the link status in the physical topology.

    1. Choose Topology > Topology Management from the main menu.
    2. In the Topology Management window, view the status of the link between the OLT and an upstream device.

  2. Monitor the sending/receiving packet loss rate and bandwidth usage of the OLT uplink interface.

    You can choose either of the following methods:

    • (Recommended) Monitor the items through OverView of the GPON management module.
      1. Choose Resource > PON from the main menu.
      2. In the OverView window, monitor the sending/receiving packet loss rate and bandwidth usage of the OLT uplink interface.

    • Monitor the items through neighbor information displayed in OLT's NE Manager.
      1. Choose Resource > PON from the main menu.
      2. Choose PON Resource > Equipment from the navigation tree on the left.

      3. Click the name next to a specific OLT in the OLT list. The OLT's NE Manager is displayed. You can view the sending/receiving packet loss rate and bandwidth usage of the OLT uplink interface as shown in the following figure.

Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 337096

Downloads: 682

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next