No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IoT Upgrade Management

IoT Upgrade Management

You can upgrade a eLTE-IoT terminal to a later version or roll back a eLTE-IoT terminal version to an earlier version.

Prerequisites

  • You have logged in to the eSight client.
  • You have obtained the firmware version file for a specific eLTE-IoT model or a firmware version file for a specific eLTE-IoT model that has been created in eSight.
  • You have been assigned the operation rights.

Procedure

  1. Choose Resource > eLTE > Device Software Management > IoT Upgrade Management from the main menu.
  2. Click to create a task.

    1. Set Task Name, Device type, Task type, Scheduled task, Scheduled Time and Activate now in Task Settings.
      • If you set Scheduled Task to ON, set Scheduled Time manually.
      • If you set Scheduled Task to OFF, eSight performs the upgrade task immediately.
      • If you set Activate now to ON, the deployment and activation command will be sent immediately after the version file is downloaded. You can also manually deploy and manually activate the version in the Task Details area.
      • If you set Check version to ON, After version verification is enabled, filtering is performed based on the differentiated upgrade package during device selection. If version verification is disabled, filtering is not supported. Ensure that the differentiated upgrade package version can be used for upgrade.
    2. Set Main package ,File type and Software Versionin Select File.
    3. Select device in Select Device.
      1. Click and select a managed object on the page that is displayed.
      2. Click OK.

  3. Click OK.

Follow-up Procedure

you can perform the following operations on the IoT Upgrade Management page.

Task

Operation

Details

You can perform this operation to view task details.

  1. Click name of the target task.
  2. Browse the information of task on new page.
  3. Click Return to return to the IoT Upgrade Management page.

Set parameters

  1. Click.
  2. Set Upgrade Timeout Time and Configure Upgrade Total Concurrency on the new page according to actual needs.
  3. Click Apply.

Query task

You can perform this operation to check whether a eNodeB is upgraded.

  1. Specify the search criteria, including Task Type, Task Status,eSE IPaddress, and eSE name.
  2. Click Search. Upgrade information about the queried task is displayed on the current page.

Stop task

  • You can perform this operation to stop upgrade tasks.
    • Stop a single task.
    1. Click next to the target task.
    2. Click Yes in the Confirm dialog box.
  • Stop multiple tasks in a batch.
  1. Select the tasks you want to stop.
  2. Click.
  3. Click Yes in the Confirm dialog box.
    NOTE:
    • If the task is stopped, the upgrade progress of some terminals may become unknown. You can use the DSP DEVICE command of the MML command function for query.
    • When secondary delivery is performed on terminals in Unknown state and the error information "Is Already The Current Version" is displayed, the first delivery has been successfully performed on the terminals, which is normal.

Archive task

You can perform this operation to move upgrade information to Upgrade History.

  • Archive a single task.
    1. Click next to the target task.
    2. Click Yes in the Confirm dialog box.
  • Archive multiple tasks in a batch.
    1. Select upgrade tasks you want to archive.
    2. Click.
    3. Click Yes in the Confirm dialog box.
Translation
Download
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 316376

Downloads: 639

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next