No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Set the Date Format Displayed on the eSight Client

How Do I Set the Date Format Displayed on the eSight Client


How can I set the date format displayed on the eSight client?


  • The date format setting function is valid to all dates related to alarms. Dates irrelevant to the alarms are not affected by the settings.
  • The date format setting function is limited. To use the function, contact the technical support.
  1. Enable the date format setting function on the eSight server.
    1. Log in to the eSight server.
    2. Open the {eSight installation directory}/AppBase/etc/ file and set displayMenu to true to enable the date format setting function and menu display on the GUI.
    3. Delete the dateFormat-filter-conf.xml file (back up the file before deletion) from {eSight installation directory}/AppBase/etc/ to remove the limitation on the date format setting function.
    4. Restart eSight.
  2. Choose System > System Settings > Date Format Settings from the main menu and set the format of the date displayed on the eSight client.

    Choose Date delimiter and Date format based on the site requirements, and click Apply.


    After the setting takes effect, dates related to alarms are displayed in the configured format. You can go to a page and press F5 to view the date display effect.

Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 311191

Downloads: 635

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next