No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting to a Third-Party System Using HTTPS

Connecting to a Third-Party System Using HTTPS

A third-party system can use HTTPS to access open eSight resources, for example, security management, NE access management, and alarm management.

Prerequisites

  • You have negotiated with the third-party system for the IP address and port of HTTPS.
  • You have obtained the IP address and system ID of the third-party system.
  • You have the operation rights for System Integration Parameter Settings.
  • On the Local System Settings page, the parameters in the SNMP Interface area have been configured.

Procedure

  1. Choose System > System Settings > Northbound Integration from the main menu.
  2. Click Apply.
  3. Choose Third-party System Settings from the navigation tree and click Create.
  4. In the Third-party System area, set the IP address and system name of the third-party system. Select HTTPS for Protocol type.
    After this protocol is selected, the IP address of the third-party system is automatically added to the IP address whitelist file. The whitelist file path is eSight installation directory/AppBase/etc/iemp.framework/ip.white.list/ip-white-list-openapi.properties. The format is as follows: 10.1.1.2@jetty.openapi
    NOTE:
    If the third-party system is a distributed system and multiple IP addresses need to access eSight, set IP address in the third-party system information to the alarm receiving address of the third-party system. On the GUI, you only need to add one address for a third-party system with multiple IP addresses. Other access addresses can be added to the whitelist by using the following command tools:
    • Windows
      1. Log in to the server as the Administrator user.
      2. Run the following command to switch the directory.

        cd /d eSight installation directory/mttools/tools/rostool

      3. Run the following command to add an IP address to the whitelist:

        rosconfig.bat -i 10.1.1.2

        10.1.1.2 is the added IP address.

    • Linux
      1. Log in to the server as the ossuser user.
      2. Run the following command to switch the directory.

        cd eSight installation directory/mttools/tools/rostool

      3. Run the following command to add an IP address to the whitelist:

        ./rosconfig.sh -i 10.1.1.2

        10.1.1.2 is the added IP address. After the command is executed successfully, check whether the IP address is added in the ip-white-list-openapi.properties file.

  5. Set System ID and Notification.
    NOTE:

    System ID: indicates the unique ID of the third-party system.

    Notification: indicates whether to receive a power-on notification message from a third-party system. After selecting Receive system power-on notification, you need to set URL for power-on notification.

  6. Click OK.
    NOTE:

    For details about how to perform related operations after the connection, see Self-Service Integration User Guide.

  7. Set alarm filtering parameters to mask or report the eSight alarms that meet the filter criteria.

    Choose Alarm Filter Settings from the navigation tree. Set filtering parameters and click Apply.

    NOTE:
    • If you set the alarm filtering mode to Mask and leave the alarm filter criteria blank, all alarms will be reported.
    • If you set the alarm filtering mode to Report and leave the alarm filter criteria blank, all alarms will be masked.
Translation
Download
Updated: 2019-08-10

Document ID: EDOC1100011877

Views: 299384

Downloads: 616

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next