No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


This section describes precautions on using the compliance check function so that eSight can be used properly.

License Support

Basic functions and features are not controlled by licenses.

Component Dependency

The compliance check depends on the Network Device Management Component.

Protocol Support

SNMP and STelnet/Telnet are required.

Device Support

Huawei S series switches, H3C devices, and Cisco devices are supported. For details, see the Specification List.

Version Support

This function is supported in eSight V300R008C00 and later versions. For details, see the Specification List.

Application Scenario

Based on the user-specified rules, check whether the device configurations in eSight meet users' expectations.

Feature Limitation and Dependency

  • Since command lines and their outputs are directly displayed on the foreground, do not use command lines that query or carry sensitive information.
  • Compliance check allows users to set rules to check whether device configurations meet the expectation. To modify and deliver configurations, use other tools (for example, the intelligent configuration tool).
  • Audit rules obtain device configurations through command lines for check. Do not deliver commands that may modify device configurations to devices. Otherwise, service risks exist.
  • Disable the device function to record logs to the console. If you enable the function, the audit result may be abnormal.
  • It is recommended that one task contain no more than 1000 rules. Too many rules may cause the page to stop responding.
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 331394

Downloads: 660

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next