No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSight V300R009C00 Operation Guide 10

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Introduction to the eService

Introduction to the eService


Alarms reported by storage devices and servers can be sent to the eService cloud-end management system through emails on eSight.


The 24/7 active monitoring for device alarms needs no human intervention. Compared with the traditional manual reporting method, device alarms are automatically reported to the eService cloud-end management system, therefore reducing fault reporting processes and handling time.

Application Scenarios

In customer's network, alarms of storage devices and servers are automatically reported to the eService cloud -end management system through eSight.

Working Principles

The working principles of the eService feature on eSight are as follows:

  1. After eSight is interconnected with a device, alarms generated by the device are reported to eSight.
  2. eSight encrypts the alarms and then send them to the dedicated email box of the eService cloud-end management system based on the preset principles.
  3. The eService cloud-end management system analyzes the reported alarms, and then an eCare/iCare trouble ticket is created automatically or manually by CCR.

Figure 5-6 shows detailed service process.

Figure 5-6 Principles of the eService feature

Application Restrictions

  • There are region restrictions on eService. For details, consult the local customer service personnel.
  • Huawei Storage, Rack Servers, Blade Servers, High-Density Servers support eService feature.


  • Supported version: eSight V300R005C00 and later.
  • Supported license: No license is required for the eService feature on eSight. For eSight management servers and storage devices, however, license for eSight management console and the corresponding devices are required.
Updated: 2019-09-07

Document ID: EDOC1100011877

Views: 333104

Downloads: 667

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next